加入收藏| 設為首頁| 客戶驗廠| 聯系我們 |
網站導航
歡迎光臨深圳市通翔企業管理顧問有限公司!
驗廠咨詢  SYSTEM
大客戶專線
13798281568
驗廠_深圳咨詢公司_BSCI認證_迪士尼認證_EICC認證_認證驗廠-通翔驗廠
百思買(BestBuy)驗廠

老时时彩360投注:Bestbuy驗廠輔導---(QAS/QMS)BBY工藝要求(檢驗報告)

發布時間:2018/9/12 14:54:02   發布來源:本站    作者:

重庆老时时彩登入网站 www.vgtbl.icu Section 6 – 檢驗報告 Inspection Report Requirement


6.1供應商首檢報告需包含如下信息 First article check report by vendor must include below information:


6.1.1訂單號,機種名,目的地,產線名,客戶名,檢驗員,審核員等; Order PO#, Model Number, Destination, Production line, Customer, Inspector, Approval;


6.1.2首件檢查至少有 3PCS 包裝成品檢驗信息及數據;First Article check need implement at least 3pcs products;


6.1.3記錄所檢產品序列編號,軟硬件版本號及關鍵部品, 安規部品型號; Record inspected product S/N, HW/SW version, Critical & Safety Components Model Number;


6.1.4首檢報告檢驗項目應包括 First article check items should include:


1) 產品的安全,功能,性能,外觀,結構,內部裝配工藝,包裝,配件檢查; Product safety, function, performance, appearance, structure, internal workmanship, package, accessory check;


2)產品關鍵可靠性測試如老化(含高低電壓),反極性測試(DC 供電產品),裸跌(便攜式或戶外產品),絲印質量測試等;Key reliability testing items for product such as burning testing (high/low voltage), Reverse polarity test (product with DC power supply), Bare unit drop test (portable/outdoor product),silkscreen quality testing etc.


3)包裝關鍵可靠性測試如運輸振動測試,卡通箱跌落,個體包裝跌落,掛鉤,手提扣強度測試等; Key package reliability testing item such as Carton Vibration Test, Carton Drop Test, Individual Drop Testing, Hang Hole Strength Test, Portable buckle-handle strength test


4)跟產品相關的兼容性測試; Product compatible test;


5)產品與工程承認樣品種&BOM核對; Confirm production product with BOM & approved engineering sample;


6.1.6對于實測數據如電氣性能亮度,響度,尺寸,重量,溫度,功率,失真,頻響,分離度等都需要記錄 3 組具體數據; Measured data such as performance measurement e.g. brightness, loudness, dimension, weight, temperature, power, THD, frequency response, separation need be recorded with at least 3 products measurement;


6.1.7首件檢驗的不良描述及問題嚴重程序的判定(如發現缺陷); Defect description for 1st article check and issue severity level judgment should be included in 1st article check report;


6.1.8首件檢驗判定結果:符合/不符合/待定; 1st article check judgement should include conform/no-conform/pending;供應商按 LOT 的檢驗報告需要包含如下信息 Vendor inspection report by lot inspection need include below information:


6.2.1訂單號,機種名,目的地,產線名,客戶名,總訂單數量,當批次號,當批數量,檢驗員,審核員等 Order PO#, Model Number, Destination, Production line, Customer, Whole PO# Quantity, Lot number, lot quantity, inspector, Approval;


6.2.2抽樣標準,方案及 AQL 水平;


6.2Sampling inspection standard, plan and AQL level;


6.2.3記錄檢驗產品序列編號,軟硬件版本號; Record S/N for inspected products, SW/HW version


6.2.4不良產品記錄包括:序列號,問題嚴重程度判定,問題點描述,總缺陷數統計等;NG product records should include S/N, issue severity level, issue description, total defect statistics;


6.2.5 LOT 檢驗結果判定:接收/拒收/待定; Lot inspection result judgement: Accepted/Rejected/Pending;


6.3BBY 自驗貨報告 -按 BBY 要求填寫; BBY self-inspection report: Fill report by BBY report requirement.


本文作者:重庆老时时彩登入网站

本文地址:

版權所有 轉載時必須以連接形式注明作者和原始出處

Tags標簽:
0

立即咨詢通翔認證驗廠專家

13798281568立即在線咨詢

相關資訊

    暫無相關的資訊...

公司地址:深圳市龍華新區民治街道藍坤大廈8層

Copyright © 2010 - 2014 All Rights Reserved 深圳市通翔企業管理顧問有限公司 版權所有

粵ICP備13017809號-1

双色球重复中奖号码 北京pk10冠军三码计划 彩神平刷软件靠谱吗 pk10最牛稳赚模式8码计划 七星彩最容易中奖方法 北京pk10五码分析技巧 11选5任七聪明组合 双色球走势图带连线图 红马计划软件手机版免费 3d计划软件手机版 幸运飞艇9码在线计划 六肖赔多少 辉煌彩票窍门 三分快三免费计划软件下载 七乐彩开奖号码查询 重庆时时采彩稳赚心得